ALTOSPLINT
Historical memory
20 years technical experiences / 25 countries exporting record. Korean military hospital supplier for two years in a row overseas local site installation for manufacturing machine.
Fiberglass / Polyester / Non-woven substrate
ALTOSPLINT is synthetic orthopedic product intended for the emergency and temporary use.
Its outside pads are non-woven fabric and the inside is 7—8 layers of fiberglass or a single layer of non-woven substrate impregnated with water-activating polyurethane resin.
The setting time is approximately 4 minutes and it takes 20 minutes for weight bearing.
Exposure to any moisture will cause the splint to become rigid.
Neat appearance
Strength
ALTOSPLINT™ has superior strength.
Moulduability
Superb X-ray permeability
ALTOSPLINT™ has superb X-ray permeability, which allows taking X-ray with the splint.
A Variety of Sizes
ALTOSPLINT™ provides 5 and 9 different sizes in Roll Type and One Step Type respectively
ALTOSPLINT™ no need to wear gloves for application.
No-needle sprouting problem
When fiberglass was cutting, Some other fiberglass would be sprouted up and became painful needles.
However ALTOCHEM fiberglass has treated unique heat treatment, It does not leave any of hazard
| size | packaging | type | substrate |
|---|---|---|---|
| 2in x 5yds (5.0cm x 4.5m) | 1 Roll/Inbox |
|
Fiberglass Non-woven fabric |
| 3in x 5yds (7.5cm x 4.5m) | 1 Roll/Inbox | ||
| 4in x 5yds (10.0cm x 4.5m) | 1 Roll/Inbox | ||
| 5in x 5yds (12.5cm x 4.5m) | 1 Roll/Inbox | ||
| 6in x 5yds (15.0cm x 4.5m) | 1 Roll/Inbox | ||
| 2in x 10in (5.0cm x 25cm) | 10 EA/Inbox | ||
| 3in x 12in (7.5cm x 30cm) | 10 EA/Inbox | ||
| 3in x 35in (7.5cm x 88cm) | 5 EA/Inbox | ||
| 4in x 15in (10.0cm x 38cm) | 10 EA/Inbox | ||
| 4in x 30in (10.0cm x 75cm) | 5 EA/Inbox | ||
| 5in x 30in (12.5cm x 75cm) | 5 EA/Inbox | ||
| 5in x 45in (12.5cm x 114cm) | 5 EA/Inbox | ||
| 6in x 30in (15.0cm x 75cm) | 5 EA/Inbox | ||
| 6in x 45in (15.0cm x 114cm) | 5 EA/Inbox |